Running Freesco 0.2.7 from hdd without msdos

1. Make sure your hdd partition is FAT-12 or FAT-16. NOTE: FAT-32 is not supported.

2. Download syslinux.gz from http://www.freescosoft.com and save it on freesco floppy in a:\router\ directory. (if you have tuned freesco on a floppy which can connect to internet you can skip this step).

3. Insert Freesco floppy and boot from it.

4. Connect to internet and download syslinux.gz :

export `grep PROXY /etc/system.cfg`
snarf http://your_local_freescosoft_mirror/0.2.7/download/syslinux.gz /tmp/syslinux.gz

or if you downloaded file in step 2 just copy it:

cp /mnt/router/syslinux.gz /tmp/syslinux.gz

5. Unpack it and make it executable:

zcat </tmp/syslinux.gz >/tmp/syslinux
chmod a+x /tmp/syslinux

6. Move your router to hdd:

move2hdd

7. Mount your hdd partition:

mount -t umsdos /dev/hda1 /hd

8. Copy ramdisk and kernel:

cp /hd/router/ramdisk /hd
cp /hd/router/kernel /hd

9. Create new syslinux config file:

cat /mnt/syslinux.cfg | sed s/fd0/hda1/g > /hd/syslinux.cfg

10. Unmount hard disk partition:

umount /hd

11. Install syslinux:

syslinux /dev/hda1

12. Halt your router.

halt

13. Remove floppy and press Reset button.

14. Enjoy!

 
freesco/howtos/running_freesco_0.2.7_from_hdd_without_msdos.txt (58216 views) · Last modified: 2005/09/14 00:49 (external edit)
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki