You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.
howtos:ip-subnetworking:
14 Hitsces (such as a router) will have 6 IP
numbers - one for each interface to each network to which it is... cimal) numbers separated by (.) dots.
As each one of the four numbers is the decimal representation... class A network numbers
available, with each one containing up to 33,554,430 possible
interfa
freesco:manuals:rfc1918:
11 Hitsrnet itself.
The Internet has grown beyond anyone's expectations. Sustained
exponential growth continues to introduce new challenges. One
challenge is a concern within the community that globa... osts within enterprises that use IP can be partitioned into three
categories:
Category 1: hos
freesco:howtos:freesco_03x_mv2hdd_howto:
10 Hitsns of Freesco, but I decided to go for the latest one, 032. These instructions are based on that versio... ve DOS installed on it.
But who has it nowdays ? One easy solution is to use the start diskette from W... nd download a bootdisk of your choice. I used the one for Win98SE.
Download the file, insert the floppy
freesco:howtos:installing_nic_s:
9 Hits right out of the box. To find out if your NIC is one of those, go to the FREESCO download site at http... ICs that need additional drivers. If your card is one of the ones with built in support, you don't have... d out how to do this.
**Note**: Even if you have one of the NICs that FREESCO supports out of the box,
freesco:howtos:build_in_commands:
8 Hitsge: arpf [-i if] [-s]
/bin/arpmon
Script
Usage: NONE, This script has no arguements. It is executed on... is script takes any
file and strips all other components from it such as the directory and
any extensio... output version information and exit
Each MODE is one or more of the letters ugoa, one of the symbols +
freesco:howtos:setting_up_an_development_environment:
7 Hits I bet there are thousands of things that can be done in other ways. I do not claim that this is the "o... at should be used for Zipslack must have at least one partition of the hard disk formatted using FAT. I... omputer I would recommend this approach.
**Milestone 1**: You should have a FAT-based computer which y
freesco:manuals:027:2._installation:
7 Hits related bugs or vulnerabilities are still fixed. One of these fixes is a **mandatory** installation of... nsible io and irq settings. If you have more than one Ethernet card, each must have unique settings. Tw... e able to run the configuration utility to change one - you must remove one card, change the setting of
freesco:manuals:03x:features:
6 Hits
* Support for up to ten networks. This can be done with 10 nic's, or with multi-port network cards, ... ing can be limited to a range of IP's, or to just one IP per printer.
* Support for up to ten modems... nding upon how much ram you have, FREESCO can add one 2Mb, one 4Mb, one 2Mb and one 4Mb, or two 4Mb ram
freesco:howtos:howto_unison_and_xinetd:
6 Hitsison to sit there on an open port, waiting for anyone to
connect and do anything they want to your file... her versions for other clients,
but you need this one for your server.
2. Decide where Unison's "home ... :x:804:
Make sure the home directory matches the one chosen in Step 2.
4. Create the home directory,
freesco:manuals:03x:relnotes034:
5 HitsH tunnels to the local network.
Two new options, one to disable root logins with the FTP server and th... r in "s" server mode.
Previously in 033 this was done automatically if there was only one network
card ... if a configuration file becomes corrupt or if anyone makes
changes that cause the file not to function
freesco:manuals:027:1.introduction:
5 Hits related bugs or vulnerabilities are still fixed. One of these fixes is a mandatory installation of the... ed to download the latest FREESCO 0.3.x instead.
One reason to use FREESCO 0.2.7 could be because more... Server
* HTTP Server
* Telnet server (only one connection per time)
* Print Server
* Remot
freesco:howtos:how-to_setup_a_mail_server:
5 Hitso is understand how the software packages rely on one another:\\
**EXIM + POPA3D = 'MAIL SERVER'** and how one won't work without the other.\\ \\
FOR THE NEWBIES like myself that need to have some things spelled out.
Popa3d (or Qpopper) like mentioned previously is a POP3 SERVER, another way to think
freesco:project_team_members:
4 Hits first with the Apache package, just because everyone said it would never run on FREESCO and after that... s for it. But as a twist of fate I ended up being one of the few or maybe even the only one that even h... uprise when I talked with Serge about what I had done he stated that he was no longer able to continue
freesco:manuals:027:modules.htm:
4 Hits ^
| ne | ISA NE2000 and clones, and some PCI NE2000 clones. |
| ne2k-pci * | Most PCI NE2000 clones, including rtl8029 |
| 3c509 | 3com 3c509, 3c509B, 3c529, and 3... Netgear FA-311 |
| ne2k-pci | Most PCI NE2000 clones, including rtl8029 |
| rtl8139 | Realtek 8129/8