You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.
freesco:howtos:freesco_03x_mv2hdd_howto:
19 Hits on HD
* Just jump to the shell.
If you don't type anything within 8 seconds, you will be taken to t... and start over. As we want to install on the HD, type
<code>mv2hd</code>
and press Enter.
The router ... you are happy with that value, you don't have to type anything, you can just press return. On the other
freesco:howtos:dialin_setup_howto:
13 Hitsction, log in as root.
- At the [Linux] prompt, type **setup** [enter].
- Type c or m or nothing [enter].
- Type a for a) Advanced settings.
- Type the corresponding numbers for the following acti... #8221;,
otherwise not, it seems.</code>
- Then type x to exit from Advanced setup.
- Then type s fo
freesco:howtos:forward_a_port:
11 Hitsthe web panel ====
Open you favorite browser and type http://your.freesco.ip:82 in the URL address bar.... ^
| Type | Type of port, there are two //flavours//, UDP o... |
| Port | The port number depends on the type of game or service |
| | f.i. port 80 is u
freesco:howtos:howto_configure_xinetd:
8 Hits
instances = 60
log_type = SYSLOG authpriv
log_on_s...
{
flags = REUSE
socket_type = stream
wait = no
... f requests xinetd can handle at once.\\
* **log_type** — Configures xinetd to use the authpriv log fac
freesco:howtos:compiling_programs_for_use_with_freesco:
7 Hitsn DOS, indicated by a C:\> or C:\WINDOWS> prompt, type:
<code>CD\LINUX</code>
You should see the prom... startup file to indicate the correct hard drive. Type:
<code>EDIT LINUX.BAT </code>
You should now be ... Then, simply ignore the instructions above.
Now type:
<code>LINUX </code>
You should see Linux start,
freesco:howtos:howto_unison_and_xinetd:
6 Hits for root only:
service unison
{
type = UNLISTED
protocol = tcp
socket_type = stream
port = 7654
flags = NAMEINARGS
s... et's go over what each of these lines means:
type = UNLISTED: This allows us to create a service th
freesco:manuals:027:2._installation:
6 Hitst cards should be set to Legacy.
There are three types of modems freesco will work with - external mode... sert the disk into a running freesco machine, and type the following:
<code>
mount -t vfat /dev/fd0 /fd... cards ====
Here are a few suggestions for common types of cards which may require special attention to
freesco:howtos:finding_your_external_ip_address:
6 Hitsot (via telnet).
If you're using Freesco v0.2.7, type:
<code>cd /mnt/router/fix
edit getip</code>
If you're using Freesco v0.3.0, type:
<code>cd /boot/bin
edit getip</code>
Now, type the following:... d.
Next, you need to make the script executable. Type:
<code>chmod 755 getip
cp getip /bin</code>
No
freesco:howtos:how-to_setup_a_mail_server:
5 Hits, teddy).</note>
To edit the file you can simply type :\\
**edit /etc/exim.conf**\\
(followed by <enter... exim works using telnet.\\
Log in as **root** and type:
<code>telnet localhost 25</code>
<box 100% round... 4.50 Sat, 04 Feb 2006 03:12:34 +0000</code>
then, type
<code>quit</code>
and try
<code>telnet router.ip.
freesco:howtos:build_in_commands:
5 Hits
/bin/ipautofw
Binary
Usage: ipautofw COMMAND -r TYPE nn xx -h yyy.yy.yy.yy
COMMAND must be either -A -D or -F
TYPE must be either udp or tcp
-F flushes all current ipautofw forwards.
-A adds forwa... ary
Usage: mount [-hV] mount -a [-nfFrsvw] [-t vfstypes]
mount [-nfrsvw][-o options] special | node mo
freesco:howtos:how-to_make_ssh_more_secure:
5 Hits.
<code>Advanced settings (x - exit) []? 47</code>type <enter>, then here :
<code>
Enable SSHD t... nswer s.
47 Enable SSH server y/s/n [y]?</code> type "y" and <enter>, when asked :
<code>471 SSH port [22]? 222</code>type the port number you would like ssh to use (for instance 222 ) followed by <ente
freesco:howtos:setting_up_reverse_dns_for_your_subdomains:
4 Hits your Freesco box via telnet (under Windows, just type telnet <your router's ip>) and login as root.
Type:
<code>cd /mnt/router/etc
edit named192.rev</code>
NOTE: You need to replace named192.rev abov... rm.
Finally, you should restart your nameserver. Type:
<code>cp /mnt/router/etc/named*.rev /etc
rc_na
freesco:howtos:setting_up_an_development_environment:
4 Hitsachine and boot to DOS. Once you are in DOS, just type
<code>linux</code>
and Zipslack should start.... tinue with this step you should find out the name/type of your NIC, otherwise the kernel can't be config... is menu, select the sub menu "(Pentium) Processor Type" and change this to what best matches your CPU. I
freesco:howtos:create_a_cgi_script_using_only_shell_scripting:
4 HitsFreesco box as root (via telnet/console/SSH), and type:
<code>cd /wwa/cgi
edit info.cgi</code>
Now, co... [ "$R" != "1" ]; then R="0"; fi
cat <<-!
Content-type: text/plain
!
case "$Q" in
"ipaddr")
getip;;
"... ot be wrapped when you save them.
If you've hand-typed this, and it's not working, pay particular atten